As an important part of electronic cigarette equipment, atomizers have an extremely important impact on the user's experience and also have great playability. So, IHAVE VAPING will share some little knowledge about vape vaporizers with you.
Generally speaking, vape vaporizers can be divided into three types, namely core replacement type, oil drip type, and self-made type (some people divide them into disposable cartridges, small atomizers, and large atomizers). But, no matter which method of division it is, it does not affect what we are going to talk about today, so let's take a look at it now.
1. what is the short circuit of the atomizer, is there any danger?
There are positive and negative electrodes at the bottom of the atomizer. Generally, T-shaped rubber or silicone material is used as insulation. If there is a short circuit, the current does not pass through the heating wire, and a short circuit is directly formed at the bottom. There is no danger if the battery has a scheme version. However, the battery will not work and the light will keep flashing.
2. Second, what are single-shot and double-shot?
The so-called single-shot and double-shot refers to the number of heating wires installed on the atomizer. That is, by increasing the number of hot wires, the contact area of the hot wires when vaporizing the e-juice is changed, thereby creating a large smoke.
3. single-generation electricity, or double-generation electricity?
The hot wire is equivalent to an electrical appliance in the entire circuit cycle of the electronic cigarette. We all know that the more electrical appliances we use, the greater the power consumption.
4. why does the air hole leak oil?
This situation may be caused by the cracking of the rubber ring in the airtight chamber, the failure of tightening the oil tank, the failure to restore the rubber ring of the installed atomizer, etc. In addition, it should be noted that if you buy a low-quality atomizer, and the sealing quality is not good, this may also happen. So when buying, try to choose a regular store to buy.
5. why does smoking e-cigarettes feel like fried oil?
The general reason is that the heating wire is too close to the air outlet due to the existence of the capillary phenomenon. Part of the e-liquid is pumped directly through the air intake channel without being atomized. Re-check the position of the heating wire and adjust the distance between the cotton wick and the air inlet to solve the problem.
6. is the oil drop atomizer good?
Oil drop atomizers generally use low resistance and high power output. The low resistance generates a lot of heat energy instantly, and it needs to evaporate a lot of e-liquid. Directly dripping e-liquid on the cotton core of the hot wire is the most effective and fastest way to guide the oil. At the same time, the large smoke will also make some e-liquids taste as good as Ultimate.
However, the disadvantages of dripping atomizers are also very obvious. It requires strong hands-on ability and professional knowledge, and at the same time consumes e-liquid faster. Not a great option for newbies. If you're an audiophile, you can try it.
7. how to make big smoke?
Generally speaking, high power, low resistance, and high oil conduction speed will generate large smoke, but players who play large smoke generally use drop oil atomizers. It can be difficult for a novice to use. You can use the oil storage type to experience for some time, and it is not too late to replace the knowledge and skills after accumulating to a certain extent.
8. is there any way to repair the cracked transparent warehouse?
The transparent tank refers to the oil storage tank made of acrylic or PC material in the oil storage atomizer. If they are not particularly compliant with the hardware size, they are prone to cracking under thermal expansion and contraction. It is not easy to repair after cracking and needs to be replaced with a new one.
9. why does smoking an electronic cigarette feel like a mouthful of oil?
Usually, this situation may be caused by the fact that the fuel supply speed is too fast, the suction is too strong, and the e-liquid is directly inhaled into the mouth before it is completely atomized into smoke. In addition, this feeling will also occur if the oil tank is not tightly sealed, penetrates the snorkel, and is directly sucked into the mouth without atomization. When this happens, you can check whether the oil supply speed is too large and whether there is oil leakage in the sealed compartment.
10. will it be harmful if the e-liquid is not fully atomized?
Generally speaking, there is not much problem with reliable quality e-liquid, but un-atomized e-liquid will still have a bad impact on the experience of using e-cigarettes. If you feel that the atomization is not complete during use, it can be solved by reducing the oil guide speed or increasing the output power.
11. why is there a prickling sound when smoking electronic cigarettes?
This is because the hot wire produces a sound when evaporating the e-liquid, usually the higher the fuel supply speed, the louder the sound. It should be noted that this sound is very slight with a balanced atomizer.
12. stainless steel warehouse, glass warehouse, acrylic warehouse, etc., which is better?
They have their advantages and disadvantages, and can not be generalized. The stainless steel bin is strong and beautiful, but the consumption of e-juice in the bin can only be judged by taste and experience; the glass bin is fragile, but you can intuitively see how much e-juice is still in the bin. The acrylic chamber is easy to install, and some atomizers carry more oil than the other two, but it is fragile, and the acrylic chamber is not suitable for all e-liquids, especially some e-liquids with high glycerin (VG) content. It will cause the acrylic to crack.
13. what atomizer is better to use with rods?
Both the rod and the atomizer are part of the mod. Any atomizer can be connected to any rod as long as the interface is paired. The pole is just a battery compartment, which does not have much impact on the final taste.
14. do atomizers cost oil?
The relationship between the consumption of e-liquid and the atomizer is not too big, and it is generally only related to the number of hot wires set, the oil guiding speed, and the output power. But as long as high power output is not pursued, the fuel consumption of all atomizers is usually not too high.
15. why do the dripping vape vaporizers get hot?
Generally, the oil drop atomizer is shorter than the oil storage atomizer and the finished product atomization, and the calorific value is larger. If the heating wire is continuously sucked and ignited again without cooling, it is normal to have heat accumulation. But if it does get hot, reduce the number of filaments, or increase the resistance. In addition, adding more cotton to the wick can also increase the cooling rate.
16. will the atomizer burn the core?
This problem is relatively common any atomizer will burn the core. The difference is that due to the lack of experience of novice players, the cotton wick is set too tight or too far from the oil guide hole, resulting in poor oil supply, resulting in the dry burning of the cotton wick. In addition, if the initial power is too large, it will bring too much heat to the hot wire and burn the surface of the cotton core instantly, which will cause core burning. Therefore, in the process of use, it is necessary to strive for a balance between power and oil guiding speed.
17. how long is the life of the general finished vape vaporizers core?
According to the frequency of use, the wear rate of the finished atomizer is also different. The simple way to judge is that if the e-juice of the same flavor starts to fade during use, it needs to be replaced with a new one.
Through today's and last explanations, is the knowledge about atomizers clear? If you have any experience in the process of using electronic cigarettes, welcome to communicate with us.